A 50g sample of metal was heated to 100 degrees Celsius and then dropped into a beaker containing 50g of water at 25 degrees Celsius. If the specific heat of the metal is .25 cal/g degrees Celsius, what is the
51,850 results
Chem
What is the specific heat in J/g Celsius for a metal sample with a mass 95.6 g which absorbs 841 J of energy when it's temperature increases from 30.0 degrees Celsius to 98.0 degrees Celsius?

Chemistry
a 20.94g sample of an unknown metal is heated to 99.4 degrees Celsius in a hot water bath until thermal equilibrium is reached. The metal is quickly transferred to 100 mL of water at 22.0 degrees Celsius contained in a styrofoam cup. The thermal

Chemistry
A 100g sample of water at 90 degrees celsius is added to a 100g sample of water at 10 degrees celsius. The final temperature of the water is which of the following: a) between 50 degrees celsius and 90 degrees celsius b) 50 degrees celsius c) between 10

physical science
a 1.0 kg sample of metal with a specific heat of 0.50KJ/kgCis heated to 100.0C and then placed in a 50.0g sample of water at 20.0C. What is the final temperature of the metal and the water? I can't figure this out. Is the answer room temperature???

chemistry
A 152g sample of ice at 37 degrees Celsius is heated until it turns into liquid water at 0 degrees Celsius. Find the change in heat content of the system. I'm really confused on how to solve this question knowing the fact that the state of the system is

ChemistryDr.Bob
An unknown piece of metal weighing 100. g is heated to 90.0 degrees Celcius. It is dropped into 250 g of water at 20.0 degrees Celcius. When equilibrium is reached, the temperature of both the water and piece of metal is 29.0 degrees Celcius. Determine the

Chem hw!
1. What pressure would be needed to compress 25.1 mL of hydrogen at 1.01 atm to 25% of its original volume? 2. If the pressure on a 1.04L sample of gas is doubled at constant temperature, what will be the new volume of the gas? 3. A 1.04L sample of gas

Chemistry
A 25g piece of an unknown metal alloy at 150 degrees Celsius is dropped into an insulated container with 200 g of ice. Calculate the specific heat capacity of the metal, given that 9.0 g of ice melted. How would you work this out?

Chemistry
A 5.0g Sample of KBr at 25.0 degrees celsius dissolves in 25.0 degrees celsius 25.0 mL of water also at 25.0 degrees celsius. The final equilibrium temperature of the resulting soltution is 18.1 degrees celsius. What is the enthalpy of of solution in

Chemistry
A piece of metal A and a piece of metal B of the same mass and at the same temperature of 80°C are dropped into seperate beakers each containing 100.0 g of water at room temperature. Once they equilibrate, you find that the beaker with the sample of metal

Science
A piece of unknown metal with a mass of 68.6 grams is heated to an initial temperature of 100 Celsius and dropped into 42 grams of water with an initial temperature of 20 Celsius in a calorimeter the final temperature of the system is 52.1 Celsius the

Physics 20
1. How much heat energy is required to change 500 grams of water at 100 degrees Celsius to steam at 100 degrees Celsius? 2. How much energy is lost if 7kg of water is cooled from 46 degrees Celsius to 2 degrees Celsius? 3. How much energy is gained when a

physical science
To what Celsius temperature must a gas sample initially at 20 degrees Celsius be heated if its volume is to double while the pressure remains the same?

Chemistry
30 grams of a metal at 100 degrees Celsius is placed in a calorimeter containing 100 mL of water at 21 degrees Celsius. After a few minutes, the temperature inside the calorimeter is 24 degrees Celsius. What is the specific heat of the metal?

chemistry
If a hot piece of metal (at 80 degrees Celsius) is placed in cold water (10 degrees Celsius), what can you say about the final temperature of the water/metal mixture? If you wanted a more accurate answer, what other information would you need?

Chemistry
A 125g piece of metal is heated to 288 degrees celsius and dropped into 85.0 g of water at 26 degrees celsius. If the final temperature of water and metal is 58 degrees celsius, what is the specific heat of the metal?

chemistry
the heat capacity of copper is 0.382J/g degrees celsius. a 22.6g sample of copper at 93 degrees celsius is placed in 50g of water at 23.9 degrees celsius. what is the final temperature of the system?

Math
A heated piece of metal cools according to the function c(x)=(.5)^(x−9), where x is measured in hours. A device is added that aids in cooling according to the function h(x)=−x−2. What will be the temperature of the metal after five hours? 7 Degrees

chemistry
555 mL sample of nitrous oxide at 25 degree celsius is heated to 50 degrees celsius. If the pressure remains constant, what is the final volume?

Chemistry
A 2.5 L sample of gas at 25 degrees Celsius is heated to 50 degrees celcius at constant pressure. What would the volume be at 50 degrees celcius?

Chemistry
A sample of benzoic acid contaminated with NaCl and sand is to be recrystallized: Benzoid Acid: Solubility in water at 100 degrees Celsius in g/100 mL = 6.8, at 0 degrees Celsius in g/100 mL = 0.2. NaCl: Solubility in water at 100 degrees Celsius in g/100

Chem hw!
1. What pressure would be needed to compress 25.1 mL of hydrogen at 1.01 atm to 25% of its original volume? 2. If the pressure on a 1.04L sample of gas is doubled at constant temperature, what will be the new volume of the gas? 3. A 1.04L sample of gas

chemistry
A 37.0 g mass of a metal was heated to 100°C and then plunged into 74 g of water at 24.0°C. The temperature of the resulting mixture became 28.0°C. (a) How many joules did the water absorb? (b) How many joules did the metal lose? (c) What is the heat

Chemistry
30 grams of a metal at 100 degrees Celsius is placed in a calorimeter containing 100 mL of water at 21 degrees Celsius. After a few minutes, the temperature inside the calorimeter is 24 degrees Celsius. What is the specific heat of the metal?

chemistry
What mass of the metal must be heated to 95 degrees celsius in order to be used to warm 2.548 L of water from 18.1 to 22.5 celsius

Physics
A physicist converted 2kg of water at 37 degrees Celsius to steam at 100 degrees Celsius. Assuming no heat is lost, calculate the amount of energy needed (i) to heat the water at 100 degrees (ii) to heat the water from 100 degrees Celsius to steam at 100

chemistry
how would i calculate; a 50g sample of water at 100 degrees is poured into a 50g sample of water at 25 degrees. with a specific heat of water (l) being 4.184 j/g degrees C.what will be the final temperature of the water? heat gained + heat lost = 0

Physics 100
A 355g piece of metal at 48.0 degree celsius is dropped into 111g of water at 15.0 degree celsius.If the final temperature of the mixture is 32.5 degree celsius what is the specific heat of the metal?

physics
a 200g aluminum container has 500g of water with an initial temperature of 22 degree celsius. The following heated pieces of metal are dropped into water at the same time as follows: 300g piece of aluminum heated at 100 degree celsius; a 50g piece of

CHEM
A 5.00 g sample of Al pellets (specific heat = .89 J/g degrees c) and a 10.00 g sample of Fe pellets (specific heat = .45 J/g degrees c) are heated to 100.0 degrees C. The mixture of hot Fe and Al is then dropped into 97.3 g of water at 22.0 degrees C.

AP Chemistry
A 500 g piece of metal at 60 degrees celsius is placed in 200g of water at 22 degrees celsius contained in a coffee cup calorimeter. The metal and water come to the same temperature at 32.5 degrees cesius. The specific heat of the water is 4.184

college chemistry
a 1.0kg sample of metal with a specific heat of 0.50KJ/Kg C is heated to 100.0C and then placed in a 50.0g sample of water at 20.0C . What is the final temperature of the metal and the water?

chemistry
A 4.0 gram sample of iron was heated from 0 degrees celsius to 20 degrees celsius, and was found to have absorbed 35.2 Joules of heat. Calculate the specific heat of this piece of iron.

physics
a 200g aluminum container has 500g of water with an initial temperature of 22 degree celsius. The following heated pieces of metal are dropped into water at the same time as follows: 300g piece of aluminum heated at 100 degree celsius; a 50g piece of

chemistry
a metal sample having a temperature of 100 degrees Celsius and a mass of 45.2g was placed in 50g of water with a temperature of 26 degrees Celsius. at equilibrium, the final temperature was 32.7 degrees Celsius. a)how much heat flowed into the water?

Chemistry
An insulated beaker contains 250g of water at 25 degrees celsius. Exactly 41.6g of a metal at 100 degrees celsius was dropped in the beaker. The final temperature of the water was 26.4 degrees celsius. Assuming that no heat is lost in any other way,

CHEM
A 5.00 g sample of Al pellets (specific heat = .89 J/g degrees c) and a 10.00 g sample of Fe pellets (specific heat = .45 J/g degrees c) are heated to 100.0 degrees C. The mixture of hot Fe and Al is then dropped into 97.3 g of water at 22.0 degrees C.

sciencee
1. What pressure would be needed to compress 25.1 mL of hydrogen at 1.01 atm to 25% of its original volume? 2. If the pressure on a 1.04L sample of gas is doubled at constant temperature, what will be the new volume of the gas? 3. A 1.04L sample of gas

Chemistry
A 50g sample of metal was heated to 100 degrees Celsius and then dropped into a beaker containing 50g of water at 25 degrees Celsius. If the specific heat of the metal is .25 cal/g degrees Celsius, what is the final temperature of the water? A. 27 B. 40 C.

Chem 103
a piece of gold is heated to 100 degrees celsius. A piece of copper is chilled in an ice bath to 0 degrees celsius. Both pieces of metal are placed in a beaker containing 150 g of water at 20 degrees celcius. Will the temperature of the water be greater

chemistry
35g of water at 55 degrees Celsius is heated until it is all steam at 100 degrees Celsius. How much every was added?

Chemistry
An unknown metal, heated to an unknown temperature until a liquid is dropped into a calorimeter that has 250 ml of water. The water heats up from 22 degrees Celcius to 29 degrees Celcius, at which point the temperature of the water and metal are equal. How

Chemistry
A 108g piece of unknown metal is heated to 100 degrees C in boiling water. The heated sample of metal is then dropped into 50ml of H20, which is initially at 23.0 degrees C. After a few minutes the temp. of water raises to 37.5 degrees C. What is the

Chemistry
a 5.00 gram sample of a metal is heated to 80 degrees Celsius and is placed in a 100 gram sample of water. the temperature of the water rises from 20 Celsius to 20.3 Celsius which of these is most likely to be the metal

chemistry
a 23.8 g sample of unknown metal heated at 100 degrees c is placed in 50.0 mL of water at 24 degrees c resulting in 8.5 c temperature increase. What is the specific heat of the metal

Physics
Please Help! I am having difficulties grasping these concepts. Explain please! 1. How much heat energy is required to change 500 grams of water at 100 degrees Celsius to steam at 100 degrees Celsius? 2. How much energy is lost if 7kg of water is cooled

Chemistry!!
A 100.0 g sample of ethanol at 25.0 degrees celsius is heated and boiled completely to vapor at its boiling point. How much heat does it absorb? i did.... q=100.0 *2.44*43.5=10,614 J q=100.0*2.44*53.5=13,054. then i added the two q's together and i got

Chemistry
At 28.4 g sample of aluminum is heated to 39.4 degrees Celsius and then is placed in a calorimeter containing 50.0g of water. Temp of water increases from 21.00 degrees Celsius to 23.00 degrees Celsius. What is the specific heat of aluminum?

physics
when 200 grams of aluminum at 100 degrees celsius is dropped into an aluminum calorimeter of mass 120 grams and containing 150 grams of kerosene at 15 degrees celsius,the mixtures reaches a temperature of 50 degrees celsius.what is the specific heat of

Chemistry
A sample of chlorine gas at a pressure of 420 mm Hg and in a volume of 3.50L was heated from 18.0 degrees celsius to 45 degrees celsius after being transferred to a container of volume 2.35L. The pressure in this new container should be about? The original

Physical science
a 5.0 x 10^1g piece of a metal in thermal equilibrium with boiling water is removed and placed in 1.0 x 10^2g of a cooling water bath (specific heat= 1.00cal/g degrees celsius at 20.0 degrees Celsius . The final temperature of metal and the water bath is

Chemistry
HELP!!! An unknown metal having a mass of 14.00g is dropped into 11.00mL of water at 20.0 degrees Celcius. The starting temperature of the chunk of metal is 100.0C. The final temperature of the water and metal is 32.5C. What is the specific heat of the

Thermodynamics
two hundred fifty grams of iron is heated from 27 degrees Celsius to 300 degrees Celsius. how much ice can be melted and raised to a temperature of 27 degrees Celsius by hot iron?

Chemistry
A 50g vhuck of metal (c=0.506 j/g degrees celsius) is heated to 60 degrees celsius. It is then dropped into a calorimeter (c=1.40 j/g derees celsius, m  5.0g) that contains 100g of liquid. The temperature of the liquid raises from 15 degrees celsius to 20

Chemistry
A 11.6 g sample of an unknown metal was heated to 100.0 oC and then added to 25.0 g of water at 23.0 degrees Celsius in an insulated calorimeter. At thermal equilibrium, the temperature of the water in the calorimeter was 24.8 degrees Celsius. What is the

Chemistry
a 250.0g mass of metal at 112.4 degrees celcius is dropped in a calorimeter (c=1.40j/g degrees celsius, m = 5.0g) containing 150.0g of water. The water and calorimeter are initially at 25.0 degrees celsius. At the end of the experiment, the temperature of

western michigan university
A 30 gram metal at 100 degrees Celsius was dropped into 132 grams of water at 25 degrees Celsius and the final temperature for the metal in water system was 29 degrees Celsius. Calculate the specific heat capacity of the metal if the specific heat capacity

chemistry
You have a sample of unkonw metal that you have heated to 100 deg Celsius (oC) in boilin water. If, unknown to you, the metal sample cools somewhat before being added to your calorimeter, what will be the effect on the delta T for the water in your

Chemistry
a 100 g sample of ice at 15 degrees celsius is heated until it is converted to water vapour at 120 degrees celsius what is the energy change?

ScienceChemistry
A 5.00 g sample of Al pellets (specific heat = .89 J/g degrees c) and a 10.00 g sample of Fe pellets (specific heat = .45 J/g degrees c) are heated to 100.0 degrees C. The mixture of hot Fe and Al is then dropped into 97.3 g of water at 22.0 degrees C.

chemistry
a 2.00g sample of zinc metal is added to a calorimeter containing 150g of nitric acid solution initially at 20.0 degrees celsius . The temperature of the solution increased to 28.0 degrees celsius . Calculate the delta H of the reaction assuming that the

Chem 1
An 80.0gram sample of a gas was heated from 25 degrees celsius to 225 degrees celsius. During this process, 346j of work was done by the system and its internal energy increased by 7785j. What is the specific heat of the gas?

Chemistry
A sample of methane gas that has a volume of 4.0L at 15 degrees Celsius is heated to 75 degrees Celsius at constant pressure. Calculate the new volume.

physics
A piece of metal at 80 degrees celsius is placed in 1.2 L of water at 72 degrees celsius. The system is thermally isolated and reaches a final temperature of 75 degrees celsius. Estimate the approximate change in entrophy for this process.

chemistry
A 100.0 gram sample of iron at 80.0 degrees Celsius was placed in 150 grams of water at 20.5 degrees Celsius. What was the final temperature when thermal equilibrium was reached?

Chemistry
Can someone help me with this problem.... i have an exam coming tomorrow and im doing practice problems but i dont know how to do this Calculate the specific heat of a metal if 2.36102 grams of it at 99.5 degrees celsius is added to 125.0 mL of water at

Math
The Fahrenheit temperature of a certain city has never dropped below 50 degrees how would you describe this using Celsius temperature and has never dropped below how many degrees Celsius simplify your answer type an integer or decimal rounded to the

PHYSICS
A BATH CONTAINS 100 KG OF WATER AT 60 DEGREES CELCIUS. HOT AND COLD TAPS ARE THEN TURNED ON TO DELIVER 20KG PER MINUTE EACH A TEMPERATURE 70 DEGREES CELSIUS AND 10 DEGREES CELSIUS RESPECTIVELY. HOW LONG WILL IT BE BEFORE THE TEMPERATURE IN THE BATH HAS

Physics
a BATH CONTAINS 100 KG OF WATER AT 60 DEGREES CELCIUS. HOT AND COLD TAPS ARE THEN TURNED ON TO DELIVER 20KG PER MINUTE EACH A TEMPERATURE 70 DEGREES CELSIUS AND 10 DEGREES CELSIUS RESPECTIVELY. HOW LONG WILL IT BE BEFORE THE TEMPERATURE IN THE BATH HAS

chemistry
A 20 gram piece of metal is added to a sample of 100 grams of water inside a calorimeter. If the metal is at a temperature of 125° Celsius and the water is at 20° Celsius, which of the following best describes what will occur inside the calorimeter?

Physical Science
A hot metal spoon with a mass of 77.0 grams and a temperature of 95.0 degrees celsius is placed into a cup containing 100 grams of water at 20 degrees celsius. When the spoon and water reach equilibrium, they both have a temperature of 25 degrees celsius.

chemistry
a 225.0g sample of an unknown, silver, pure metal was heated to 95.5 degrees Celsius and then put into 150.50g of water at 22.5 degree Celsius. the water was heated by the hot metal to a temp. of 31.4 degree Celsius. what is the specific heat of the metal

Chemistry
A 50g chuck of metal (c=0.506 j/g degrees celsius) is heated to 60 degrees celsius. It is then dropped into a calorimeter (c=1.40 j/g derees celsius, m  5.0g) that contains 100g of liquid. The temperature of the liquid raises from 15 degrees celsius to 20

chemistry
a 225.0 g sample of an unknown, silver, pure metal was heated to 95.5 degrees celsius then put into 150.50 g of water at 22.5 degrees celsius. the water was heated by the hot metal to a temperature of 31.4 degrees celsius. what is the specific heat? what

science
a 100.0 gram metal sample is heated to a temperature of 110 degrees celcius then placed into a calorimeter containing 100.0 r of pure water (at initial temperature of 23 degrees celcius). after the sample and water reach thermal equalibrium, their final

chem 20
100. G of a metal required 848 calories to be heated from 25 degrees celsius to 100 degrees celsius calculate the specific heat of the metal

Math
A heated piece of metal cools according to the function c(x)=(.5)^(x−9), where x is measured in hours. A device is added that aids in cooling according to the function h(x)=−x−2. What will be the temperature of the metal after five hours? 7 Degrees

physics
Specific heat capacity of a certain metal is found by heating the metal and then placing it into water which is in a container made of the same material. The metal has mass of 100g and is heated to 100 degrees celsius. The container has mass of 200g and

Physics
A chunk of metal with a mass of 81.1 grams and a specific heat of 153 joules per kilogram·kelvin is heated to 95.7 degrees Celsius and placed in 144 milliliters of water at 19.5 degrees Celsius. What are the final temperatures of the metal and the water?

science
It says; the temperature of 50g of water was raised from 5 degrees celsius to 85 degrees celsius. then it asks me: what amount or mass of water was heated? how do i find that out?

chemistry
A 50g chunk of metal (c=0.0506 j/g°C) is heated to 60°C. it is then dropped into a calorimeter(c=1.40 j/g°C,m=5.0 g)that contains 100.0g of an unknown liquid. the temperature of the liquid raises from 15°C to 20°C.What is the c of the calorimeter?

Chemistry
A sample of zinc with a mass of 14g was heated to 98 degree celsius in boiling water and then dropped into a beaker containing 4.5x10^4ng of water at 25 degree celsius. when the water and metal came to thermal equilibrium, the temperature is 29 degree

Chemistry
A 40.0g sample of an unknow, yellowishbrown, pure metal was heated to 62degrees Celcius and put into a coffee cup calorimeter containing 85.0g of watera at 19.2 degrees Celcius. The water was heated by the hot metal to a temperature of 21.0 degrees

Chemistry
A 40.0g sample of an unknow, yellowishbrown, pure metal was heated to 62degrees Celcius and put into a coffee cup calorimeter containing 85.0g of watera at 19.2 degrees Celcius. The water was heated by the hot metal to a temperature of 21.0 degrees

chemistry 12
a chemical reaction released 50.0kJ of energy as it heated a sample of water from 17.0 degrees celsius to 75.0 degrees Celsius, what mass of water was heated? I have no clue as to how to do this! can anyone help?

Chemistry
A 12.0L sample of a as at a constant pressure of 608 mm Hg was heated from 40 degrees celsius to 60 degrees celsius. What volume does the gas now occupy? would I multiply 608 by 12 and then divide by the degrees celsius?

Chem
What is the specific heat in J/g Celsius for a metal sample with a mass 95.6 g which absorbs 841 J of energy when it's temperature increases from 30.0 degrees Celsius to 98.0 degrees Celsius?

Chem
What is the specific heat in J/g Celsius for a metal sample with a mass 95.6 g which absorbs 841 J of energy when it's temperature increases from 30.0 degrees Celsius to 98.0 degrees Celsius?

physics
a .300 kg piece of metal is heated to 88 degrees celsius and placed in a copper calorimeter with a mass .150 kg which contains .500kg which contains .500 L of water that are both initially at 12.6 degrees celcius. Over short period of time the mixture

physics
An aluminum cube .100 m on a side is heated from 10 degrees Celsius to 50 degrees Celsius. What is the change in its density?

Physics
An iron ball weighing 200 gm and specific heat of 0.11 is removed from a furnace and dropped into 550 gm of water at 5 degrees Celsius and the water is heated to 5 degrees Celsius. What must have been the temperature of the furnace?

Chemistry
HELP PLEASE. I have no idea how to set this up. I tried using the q=mc(change in temp) equation but its not working out. A 59.8 g block of an unknown metal at 87.5 degrees Celsius was dropped into an insulated vesssel containing approximately 33 g of ice

chemistry
A metal sample weighing 45.0 g and at a temperature of 99.1 degrees Celsius was placed in 38.6 g of water in a calorimeter at 25.0 degrees Celsius. The calorimeter reached a maximum temperature of 32.8 degrees Celsius. what was the delta t of water? what

Physics
I'm trying to rank the maximum temperatures of water at 20 degrees Celsius after adding in heated copper cylinders. The first case is 1 cylinder at 22.5 degrees Celsius. Second is two cylinders at 25 degrees Celsius. Third is 3 cylinders at 25 degrees

chem
another calorimetry experiment is performed in which a 500. gram peice of gray metal at 67 degrees celsius is added to 493 grams of water. the water's temperature, originally at 17 degrees celsius, changes to 22 degrees celsius. What is the specific heat

Chemistry
If 682000 kJ could be transferred with 100% efficiency to water, what volume of water, in liters, could be heated from 8.6 degrees Celsius to 60.0 degrees Celsius as a result?

Chemistry
Determine if the solubility would increase, decrease, or stay the same: 1) A saturated solution of sugar water is cooled from room temp to 0 degrees Celsius. 2) A solution of ocean water with dissolved oxygen is heated from 10 degrees Celsius to 15 degrees

Chemistry
3.90g sample of Al with an unknown initial temperature is dropped into 10 mg of water at 22.6 degrees Celsius. What will the change in temperature be of the Al if its final temperature is 28.6 degrees Celsius?

Chemistry
calculate the amount of heat generated when 50g of water is condensed at 100 degrees celsius

7th Science
the addition of 50 g of salt to a sample of pure water causes its freezing point to be reduced from 0.0 degrees Celsius to 3.15 degrees Celsius. determine how many degrees the freezing point dropped for every 10 g of salt added. Thank ya, randomchik.